Choosing a Townhouse Row Model Scale in Nairobi

November 19, 2026 · by Moriasi Architectural Model Makers

A row of townhouses is judged on its street face, shared driveway and the way each home sits beside its neighbour. Pick a scale that keeps those details readable and the whole scheme stays clear on the table. Moriasi3D Models can help you settle the choice before you brief.

Explore what Moriasi3D Models offers

See everything Moriasi3D Models can do for you.

Choosing a Townhouse Row Model Scale in Nairobi

Developers and architects planning a multi-unit scheme in Nairobi often ask the same question before briefing a model maker: what townhouse row model scale will show the whole development without turning it into a blur? The answer matters because a row of townhouses is judged on its street face, its shared driveway and the way each home sits against its neighbours. Good scale model designs turn the drawings into something a buyer, a bank or a county planning officer can read in seconds. A scale that is too small hides the very features that make the units appealing, while one that is too large produces a model that cannot fit on a table or into a vehicle. At Moriasi3D Models, we have built many of these rows at our workshop off Ngong' Road, and the same decisions come up each time. This article walks through how to make them well, so your presentation model supports the sale rather than getting in its way.

Why a Row of Identical Units Is Harder to Model Than It Looks

A row of repeated units looks simple on paper, but repetition is exactly what makes it difficult. When six or eight townhouses share the same layout, the eye relies on small details to tell them apart and to feel the rhythm of the street. If the scale is too small, door recesses, window frames and balcony projections shrink to marks that all look the same. The result reads as one long block rather than a set of individual homes. That is a poor outcome for a developer who is selling each unit separately.

Clients nearly always judge a development by its street face first. A buyer walking up to the model wants to see where their front door would be, how the roofline steps along the row and whether the entrances feel private. Those impressions form within the first few seconds, long before anyone studies the floor plans. For that reason, the facade must be legible from a normal standing distance of about a metre. If it is not, the model has failed at its most basic job.

A row model also has to serve two very different viewing habits. People step back to take in the streetscape, and then lean in to inspect one unit closely, often the one they are thinking of buying. The scale must be large enough to reward that close look, with visible window mullions, entrance steps and roof edges. At the same time, it must be small enough for the whole row to be taken in at a glance. Finding that balance is the core of choosing a townhouse row model scale, and it is rarely a matter of picking a number from a chart.

Reading the Drawings: Party Walls, Plot Widths and Setbacks

Party walls are thin in plan, yet they carry real weight in how a townhouse scheme is understood. They separate one household from the next, and they often rise above the roofline as a fire break or parapet. A typical party wall of about 200 mm becomes only 2 mm at 1:100, which is barely more than a pencil line. At 1:50 it grows to 4 mm, enough to cast a shadow and read as a solid divider. If the party walls matter to your story, choose a scale that gives them visible thickness.

Plot widths in Nairobi vary quite a lot between schemes. One development might offer narrow units of five metres, while another along a different road might give each home eight or nine metres of frontage. The practical rule is to test the narrowest plot in the scheme first. If a scale shows the narrowest unit with its door and windows clearly, it will handle the widest one comfortably. A five-metre frontage measures 100 mm at 1:50 and about 67 mm at 1:75, which are both workable, while at 1:100 it drops to 50 mm and starts to feel cramped.

Front and rear setbacks define the strips of driveway, lawn and garden that surround each unit, and these depth dimensions should weigh heavily in the decision. A setback of three metres is only 30 mm at 1:100, so a hedge, a gate and a parking bay must all share a very small space. At a larger scale the same strip has room for a boundary wall, a paved apron and a few trees. Reading the depth figures on the site plan early saves arguments later. They tell you whether the model will be a crisp presentation or a crowded one.

Testing a Townhouse Row Model Scale Against Driveways and Access Routes

Shared driveways are the feature most often squeezed by a scale that is too small. A six-metre driveway shrinks to a 60 mm strip at 1:100, which a viewer can still see but may not read as a place where cars manoeuvre. At 1:200 it becomes a thin line, and the model then says almost nothing about parking or circulation. Since access and parking are among the first questions a buyer asks, the driveway needs a width that people can actually read. If it cannot be understood on the model, it will be questioned in the meeting.

Pedestrian routes deserve the same attention. Paths linking each front door to the driveway or the road are often only one to one and a half metres wide, so they are the first thing to vanish at small scales. At 1:50, a 1.2 metre path is about 24 mm, which is clear enough to follow with a fingertip. At 1:100 it is 12 mm and begins to disappear beneath landscaping materials. If your scheme has gated entrances, shared walkways or a footpath to a main road, make sure the scale keeps these visible.

A practical test is simple and costs almost nothing. Take the site plan, mark the driveway at a trial scale on a strip of card, and place a small toy car or a coin cut to scale on it. If a viewer can see the turning space and imagine two vehicles passing, the scale works. If the card strip looks like a ribbon with no room to move, step up a scale before any construction begins. Doing this check in an hour can save days of rework later.

Balancing Scale Against the Size of the Presentation Table

A long row of units can easily outgrow the table or room that is available. Eight townhouses at six metres each make a 48 metre frontage, which is 960 mm at 1:50 and 480 mm at 1:100, before any landscaping or road is added. Once the base, the access road and the surrounding plots are included, the footprint grows further. Many projects end up at a point where the ideal scale and the available space do not agree. This is the moment when a split or sectional model becomes the sensible solution.

Sectional models only work well if they join cleanly. The best place for a joint is along a unit boundary, ideally at a party wall, where a vertical line already exists and the eye expects a break. A joint cut through the middle of a facade will always look like a mistake, however neatly it is finished. This means the scale should be chosen with joint positions in mind, so that each section holds a whole number of units. Planning for the seams from the start keeps the presentation looking like one continuous street.

Transport is the last practical limit, and it is often overlooked until late in the project. Every model leaves our Mucai Road workshop and has to travel to a boardroom, a sales office or an exhibition hall, sometimes across Nairobi traffic and sometimes across East Africa. A single piece longer than about 1.2 metres becomes awkward to carry through doors and to secure in a vehicle. Splitting a large model into two or three transportable modules protects the fine details of roofs and balconies. It also makes setting up on site faster and far less stressful.

Practical Recommendations for Developers and Architects

For most townhouse rows of four to eight units, a scale that shows each facade with its door and window lines is a sound starting point. In many cases that means 1:50 for shorter rows of four to six units, and 1:75 or 1:100 when the row is longer or the table is tight. At these scales the party walls, the entrance steps and the driveway all remain readable, and the street still reads as a street. If the budget or space forces a smaller scale, we suggest simplifying the landscaping rather than the facades. The units are what you are selling, so they should keep the most detail.

Confirm the scale with the client before detailing begins, because changing it later means rebuilding the base and every unit on it. A short conversation at the start, with a trial strip of the driveway and a sample of one facade, usually settles the question for good. It is also wise to keep a site plan model alongside the row model, so the wider estate, the access road and nearby amenities are still understood. The row model shows the homes, and the site plan model shows how they belong to the neighbourhood. Together they give buyers and planners the full picture without forcing one model to do two jobs.

Choosing a townhouse row model scale is really about deciding what your audience most needs to see. Repeated facades need enough size to keep their rhythm, party walls need enough thickness to register, and driveways and footpaths need enough width to be understood. The size of your table and the journey from our workshop to your venue set the practical upper limit. By testing the narrowest plot, marking the driveway at a trial scale and planning joints at unit boundaries, you can reach a sensible choice before any material is cut. Taking a day for that decision is far cheaper than rebuilding a base later. If you are preparing a multi-unit presentation in Nairobi or elsewhere in East Africa, bring your drawings to Moriasi3D Models and we will help you find the scale that makes each home in the row stand out.

See everything Moriasi3D Models can do for you.

Visit Moriasi3D Models →